How to connect FgTech Galletto V54 to vehicle and PC

FgTech Galletto V54 BDM-TriCore-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. This item works not only as FGTech Galletto 2-Master, but also work for BDM-TriCore-OBD.



FG Tech Galletto 4-Master v54 Features:

1. Support windows xp , vista, win7 , more friendly than FgTech v53 , much easier to operate

2. Unlock version , can use directly, no need to activate by us


How to connect Fgtech V54 to vehicles and computer/laptop？Can I only use obd cable to connect to vehicls? If you have same question about it, just check below instruction picture：

FgTech Galletto V54 vs. VD300 Fgtech galletto

There is a new VD300 FGTech Galletto 4 V54 Master ECU tuning kit with plastic box available in www.obdii365.com. What’s the difference between the new VD300 Fgtech and the old FgTech Galletto V54?

1.Same is the exactly the same, project same functions as well, both support BDM-TriCore-OBD Function
2.VD300 is deigned with plastic box from different manufacturer. VD300 is the given name of the new hardware
3.Firmware PCB board parts are very similar
4.Motherboard PCB layout is slightly different
5.VD300 Fgtech galletto is cheaper in price

VD300 FgTech Galletto V54 PCB display:

Old FgTech V54 Master ECU programmer PCB board

Customer feedback:
1) I have bought this galletto. Ok build quality, but both q18 and q20 are p-channel zvp2106a.
2) Now tested BDM edc16 and works ok also Renesas from Subaru. Today will try K-Line and CAN.
3) Galletto V54 VD300 (plastic box) – reads ok (via OBD EDC16C35 100% ok)
4) It doesn’t read Vag EDC15 1.9 tdi and delphy mpc555 mondeo 2.0 tdci. Read and write VAG EDC16CP34.

FgTech Galletto 4-Master V54 questions for beginners

FGTech Galletto 4 Master V54 ECU chip tuning tool some simple questions for beginners. What is difference between v54 and v53? What are the two CD? Where to download software? Could it works with other tools, like ECUSafe 2.0 OBD ECU program? We will know more about FGTech Galletto 4 from these questions.

What is difference between v54 and v53?

FG TECH galletto v54 and v53 have the same functions, but v54 only can read and write engine ECU data but no clear GR gestion.

What are the two CD in the package?

One is computer XP system CD, and the other is software.

Where to download software if CD is broken or lost?

Better ask your seller for help, for different seller will provide certain software available for their customers. Here is a link for clients bought v54 from obdii365.com:

http://www.chinaautodiag.com/html/2014-latest-version-v54-fgtech-galletto-4-master-bdm-tricore-obd-function-free-download-4477.html

Could it works with other tools, like ECUSafe 2.0 OBD ECU program?

Actually, ECUSafe 2.0 OBD ECU program is an independent software, and so does galletto; if you would put them together to use, it might be ok; if not, it also ok.

What are the features of Fgtech v54?

It supports window xp, unlock version, use directly and with FGTECH V54 PCB BORAD.

Therefore, Galletto v54 is friendlier than v53, could work with other tool or do alone, more compatible version, and available with software free download for chinaautodiag.com, with software and xp system cds and so on. Knowing more about FGTech Galletto 4 from these questions now? if do, share with your friends. 

FgTech Galletto 4 Master V54 vs. KTAG K-TAG Ksuite

What’s the different between Fgtech galletto V54 and Ktag ksuite V2.13 firmware 6.070 ECU Chip tuning tool?

OBDII365.com compiled a short guide for your reference to help you make decision upon Fgtech V54 or Ktag V2.13：

1. ECU support

KTAG fw6.070: The tool supports a wide range of BOSCH, DELPHI MARELLI, MOTOROLA, PHOENIX, SIEMENS and TRW ECU types. To know the complete list of the ECU types that KTAG supports, please visit here.

V54 FGTech Galletto: Galletto is able to program all EDC17 and MED17 ECU chips and all old protocols included from Bosch MExx, EDCxx, Marelli, Siemens, Delpy, Lucas and Denso.

KTAG and FGTech Galletto is kind of complementary. If you cannot program a certain ECU with KTAG or Galletto, you can try the other tool instead.

2. PC system support

K-TAG: Windows XP, Win 7 (partly)
FGTech Galletto: Windows XP , Vista, Win 7

3. Vehicle support

KTAG: It supports not only cars but also trucks, traktors and bikes. This includes a wide range of vehicles and bikes of Ford, Fiat, Seat, Skoda, Volkswagen, Mercedes, BMW, Mitsubishi Fuso, Mercedes, Jeep, Hyundai and other brands.

V54 FGTech Galletto: FGTech Galletto 4-Master supports all the cars, trucks, motorcycles and Marines.

4. Language

KTAG: English, Italian, German, French, Portuguese, Spanish

Galletto v54: French, Italian, English, Dutch, Spanish, Portugues, Czech and Turkish

FgTech Galletto v54 Master EOBD2 error when write ECU

When I use the Fgtech Galletto 4 Master V54 writing the ECU, there come out error, you can see it attached.

Pls advise me what should I do?

Regards

Error screenshot

ATTENTION!!!Send File to C.....to support@fgtechnology.it

Remember to sepcify ever

NR TOOL

NAME & SURNAME

FIRM OR COMPANY 

MODEL OF CAR 

TYPE OF ECU

DRIVER USED

Enclose also FILE and LOG useful for solve problem

For this problem，this may caused by three point：

1. Fgtech connection problem, use wrong cable to connect ECU

2. Fgtech galletto can‘t support your vehicle ECU

3. vehicle’s ECU have some problem

Obd365 technician suggest customer change vehicle or use ktag ksuite to try again.

Note: Fgtech special OBD than BDM， if customer prefer to BDM, k-tag is more professional.

FgTech Galletto 4 Master V54 China Clone VS. EU Clone

Fgtech Galletto 4-master v54 BDM-Tricore-OBD ECU tuning tool China clone and European clone (EU Clone) both are welcomed in the market.  What is the difference between the two ecu programmers and which one is better. Below is a compare list complied by obdii365 technicians.

1.PCB Comparison

Fgtech Galletto Chinese clone PCB board surface color is sliver, and components position are as below:

Fgtech Galletto v54 Euro clone PCB board surface color is golden and components position are as below:

Fgtech Galletto Euro clone its PCB design and component posicion

2. User Experience:

Fgtech v54 china clone is no gold immersions but PCB and soldering quality is really very good, Fgtech galletto china clone have the same component of EU clone. Also I have 2 galletto. One with yellow relays and second one with black. Both of them works very good.

I test FGtech galletto V54 on Audi 2009, Tiguan 2009, Passat 2009 and Golf 6 2009. It supports not all ecus edc17, Sure edc17cp04 and edc17cp14 year 2009 can read-write in obd. But edc17cp20, edc17cp44,etc, etc same year, have tricore protected active, and if you write in obd, ecu bloqued. I think TProt on VAG are present from 05/2009 but is very random this option is most present on engine with low power and is not compeer to years or ecu type.The best way to know if tp is active is always bootmode and read tag on file.

Besides, I collected all those cars where galletto V54 Chinese worked in one of forum around me, and I’ve made ​​this list. I hope you might help.

Via OBD
ALFA ROMEO
· edc15c7
· ME 7.3.1
· edc16c39
· edc16c39 read time 40 MINUT!
· id Alfa 147 immo off (k line /boot mode)

BMW
· edc16c31 obd
· BMW X5 2007 3.0TDI
· EDC16 OBD
· BMW 525 (E39)
· BMW 320D E46
· bmw e90

FIAT
· Grande Punto read 1_3 MJT 75 hp

MERCEDES
· EDC15C5
· edc5c2
· delphi CRD2

OPEL
· EDC16c9
· Opel Corsa-D CAN

PSA
· edc15c7 boot mode (ID problems)
· EDC 16C34
· EDC16c3 K line
· edc16c34

RENAULT
· Renault Delphi 2007 k-line

VAG
· edc15v
· EDC15-P
· edc15
· Golf Plus 2006 2.0TDI
· EDC16U34
· A4 2.0 tdi 2008
· Skoda octavia vrs 2005
· EDC15P K lINE
· VW crafter READ
· VW Golf5 1.9TDI
· Audi A6 V8 4.2l Petrol (over OBD fuse for dash fuse 11 or 15 , but it worked after pulling the fuse for dash and it went 100%)
· med9.1
· edc17cp14
· EDC17
· But edc17cp20, edc17cp44, etc, etc same year, have tricore protected active, and if you write in obd, ecu bloqued.

Via BDM
· BMW E70 3.0D EDC16
· bmw. edc16c35 from
· (Opel) EDC16c9
· iveco edc16 BDM

Via BOOT TRICORE
· Audi A6

Additionally, someone prefer fgtech v53 to v54, thinking v53 china with HW and SW upgrade is better than v54 china without upgrade.

fgtech Galletto Euro clone Test

You can change a lot of parts but will not be the same.
Details: this is my fg v53 test, when i rebuild HW i dont change U11-U15 because seller did not have them…now is changed

After SW upgrade I used it on many situation : k line (obd), can(obd), boot tricore on each ecu med17, mev17, mevd17, edc17c-cp-cv, boot st,bdm, jtag…always perfect without error.

PS: EU costs more.

http://blog.obdii365.com/2015/12/18/fgtech-galletto-v54-china-clone-vs-eu-clone/

How to install V54 FgTech Galletto 4 Master software

2014 Fgtech V54 Master with BDM-OBD function is the user-friendly ECU programmer that is respected by most professional tuners. Still some FgTech galletto beginners are seeking the software installation guide. Following is the step-by-step installation guide provided.

Operating system:
Windows XP, Vista, Win7 (better to use our win XP O/S)

How to install FgTech Galletto 4 V54 ECU tuning software step-by-step?

Pre-install caution:
DISABLE ANY ANTI-VIROUS SOFTWARE PROGRAM ON YOUR COMPUTER BEFORE INSTALLING SOFTWARE.

Video instruction: https://www.youtube.com/watch?v=R0gpO0wAxZw

Easy 10 steps:

1) Insert the CD software in package into computer

2) Open “My Computer”, locate and open “FG TECH V54 (E:)”

3) Open and install “FGtech Galletto Edited v1.0 Galletto setup”

Follow the system prompt step-by-step:

Click “Next” to install Galletto setup wizard-> Select “Destination location to C://FGTech”->Tick Create a desktop icon” and “Create a Quick Launch icon” on desktop

4) Un-tick “Launch Galletto”, click “Finish” when complete installing wizard

5) Select “Install from a list or specific location (advanced)”

6) Browse and save files to “C://FGTech//fgtech-new-deriver”

7) Open Galletto software on the desktop

The system will display a WinLicense prompt “This application has been registered to dragan xp”, click on “OK” button to continue

8) Re-install “FGtech Galletto Edited v1.0 Galletto setup” again, follow the same above procedure or simply follow system prompts

This time tick “Launch Galletto” and click “Finish” button if wizard is completely installed

Press “OK” when EOBD message displays

Launching FgTech Galletto software, accept EOBD2 warning message by clicking on “OK”

9) Select software language

Multi language available: Italian, English, Deutsch, French, Spanish, Portuguese, Czech, Turkish

10) Select vehicle make, model, ECU type to read/write ECU

PS: If you fail to install FGTech Galletto v54 software on your computer, you can try our Win XP O/S.

http://blog.obdii365.com/2015/06/18/how-to-install-v54-fgtech-galletto-4-software/

How to solve FGTech “Can not find driver” problem

Problem:

When install FGTech galletto 2, the FTReadWrite replied “Can’t find device” error message. When trying to uninstall the driver, the window screen warmed it is not FGTECH device, but USB-to-Serial device. If install the driver, fgtech software did not run and FTReadWrite or MProg didn’t find the ftdi chip. Try to install the driver on both win 7 and win xp computer over and over, but in vain.

Solution:

1) Download and install the Virtual Com Port drivers from FTDI website:

Virtual COM Port Drivers
http://www.ftdichip.com/Drivers/VCP.htm

2) Then connect the FGTech to computer via USB port which had no device programmed and 1 blank device when the MProg Utility it shows.

NOTE: If you had backup and reprogram with the ept file. The system will not recognize the FGTECH and will not reprogram the firmware bin file. The Virtual Com Port Drivers would overlay the fgtech ECU programmer. Then you have to again download the related driver in FTDI website.

CMD Uninstaller 1.4
http://www.ftdichip.com/Support/Utilities.htm

3) After install the right drivers, FTReadWrite programmed the backup firmware file, run FGTech software by referring to the user manual on obd365 webpage.

OBD365 here offers some FGTECH related files download.

How to install V54 FgTech Galletto 4 software

Read Opel EDC17 TC1767, K-TAG or FgTech Galletto?

I want to read Opel ECU EDC17 ACDelco TC1767. Which ECU programming tool should I go for, K-TAG Ksuite master or FgTech Galletto v54 master? I know both of them can read ECU in Tircore.

This is a TC 1767 3 point and boot:

Unfortunately I was told neither KTAG ecu programmer nor Fgtech v54 will do it. But should read with Fgtech galletto 2 Master version.

The galletto 2 connection wiring pinout can be loaded here:

Just put ecu in boot and read as any other 1767
Pins 3 and 10 of tricore to GND (via 1k resistor)
Pin 4 to +3.3V (1k resistor)
If this don’t work put also pin 32 to GND.

100% working if you using Fgtech galletto 2 master version.  Galletto V54 is still under testing.

Fgtech Galletto v54 vs. KESS v2 4.036 vs. KTAG

There is a thread in professionalchiptuning.net talking about three cheap and efficient ECU remapping tools – KESS V2, KTAG and FGTech Galletto. After reading the thread I realized that many forum members are wondering what the differences between the three tools are and which tool will meet their requirements. 

Comparison List	FGTech Galletto 4-master V54	KESS V2 V2.15 FW 4.036	KTAG Ksuite V2.13
Function	read and write the Data of Engine ECU	read and write the Data of Engine ECU	read and write the Data of Engine ECU
Supported Vehicles	World-wide famous brand cars, trucks and motorcycles	World-wide famous brand cars	World-wide famous brand cars, trucks
Truck	Yes	NO	Yes
Motorcycle	Yes	Yes, work with a small part	work with a small part
EDC17	Work with a some EDC17 chips	Work with a some EDC17 chips	Work with a some EDC17 chips
Via BDM or OBD	Both via BDM and OBD	Via OBD	Via BDM
Update	NO	NO	NO
Tokens	NO tokens	60 Tokens available, after use it up, get J-Link to add tokens.	500 Tokens available, after use it up, get J-Link to add tokens.
Language	English, Italian, German, French, Spanish, Portuguese, Czech, Turkish	English, German, Spanish, Italian, Portuguese, French	Italian, German, English, French, Portuguese, Spanish
1) Most beginners choose FGTech Galletto 4 V54 and KESS V2.2) KESS V2 has Anti-mediation lock module, it can do new and encrypted cars better than Fgtech V53.3) KESS V2 and KTAG are quite complementary, and can work on more cars when working together.

Note: The tools in comparison list are the latest versions.

To learn more about these ECU chip tuning tools, please visit obd365 official website www.obdii365.com

FGtech Galletto V54 4-master vs. Galletto V53

This message is to Every one that have a FGtech Galletto. Or want to Buy a new one:
I have inspecting the FGtech Galletto V53 and the Galletto V54, and after a long time, for my Surprise, I reached a conclusion, For some of you must be a desilusion for others are good news.

THE FGtech V53 AND THE FGtech V54 ARE EXACTLY THE SAME.

So, if you have a galletto V53 do not Buy the new one V54, because the only diference is the software, that does not come with Virus and trojans. 

Advise to every one that have galetto V53:You computer is full of virus and trojans, if you do not believe, Just try to run a best antivirus you have, and even with the best antivirus, the virus does not come out of the computer, You must format it.

Think since you buy galletto V53 if you had problems reading and writing ECU´s. Think if you have that problem with Galletto v52.

Think about other problems you have in Galletto PC when you insert a pen to copy something to another computer.

For sure you have a lot of problems coming when you installed the new version of Galletto V53.

The solution To have a Galletto V53 working like a Galletto 4 V54, is to have a good Software.

Nothing More.

Some one Make a compilation of the Software for Galletto V53 to give so many Problems,that People have to buy the next version V54.and they are selling it for 600 USD. and in Europe some shops are selling it for €600 and €700.

Once more: Find a good software, and you will have a fgtech V54.

Hoppe this help a lot of people. Because many People need to Work and can not work with galletto V53, and have to Buy the V54 when some of them do not even have money to eat a good meal at the end of the day. 

Some one prove to me that I am not correct!!!

If some one have a clone with this software, then I believe you have a new Version of Galletto with new ECU drivers: If not you are are being scammed. 

Here is Also the board of the fgtech galletto 4 V54 Version For the ones that have a good V53 Clone to compare the most smal component. then is just comparing the software. Good Luk to all.

IMMO off FIAT Punto with tech galletto 4 master v54

Need to immo off FIAT Punto, and I need to know what chip that I should read???

The following photo shows the ECU that I need to immo off.

Someone told me that I can read it by BDM100 or PIASINI v4.3.

Someone guest me I have a me73h4 ECU. I can read it many ways.

Here is a diagram how to read flash he made, he use galleto v54 for it. It always works well.

Then I ordered one v54 fgtech galletto 4 master, use your galetto on car list

pin 20 = gnd

pin 51.49.33.17.18 = +12 v

pin 53 = kline ( green wire in galletto)

I can read fiat me7.3 as ferrari me7.3 or alfa me7.3 by using ME 73H4. but this ECU is for fiat and it is not on the car driver list of fgtech galletto v54,according to galletto list, the fiat punto 1.2 16v is not on the list . there is just the photo of the ECU. I have to select the car and model so i can read. and there is no other car that has the same ECU .