Fgtech Galletto V54 vs. Xprog vs. Carprog vs.UPA USB

Here is a helpful text for an electronic technician having doubt about tools of airbag ECU repair work, as he said below,

“I’m electronic technician and am starting repairs airbag ECUs.
My doubt is: CARPROG or XPROG or other? or both?
What differences?
What i need more?
Carprog can help me at all? UPA or Fgtech should i need?”

Carprog reset airbag via K-Line

I would say both, carprog and xprog-m . Carprog v9.31 can do many types of airbag by K-line, so no need to open ecu, reads/clears DTC and crash data by Kline and by reading dumps as well, load them in its own software and clear them, then write back to eeprom, mcu…all in one go…
You can buy UPA USB as well, very good programmer.
You can’t cover all eeproms and MCU’s with one or two programmers…

Genuine CarProg vs Clone CarProg

The clone version works great on pretty much anything (airbag reset is definitely yes) up to about 2008-2010 but it does not support the MAC and XC chips found in some of the late model vehicles.

So clone Carprog would be a reasonable choice… learn with it, make a few $$ from it and upgrade to the original tool with the full software package and adapters. They now even have the option to ‘Legalize’ the clones to be fully updateable and work with the new chips and software that requires an internet connection for about $1500.

UPA vs Xprog vs FGtech v54 vs Carprog

UPA & Xprog m are just programmers can read MCU and EEPORMS, very different from Carprog
FGTECH v54 – its a BDM programmer for ECU and OBD2
CARPROG – programmer + many calculators, immo airbag key …. car radio, nav… read EEPROMS, some dashes are working and couple AIRBAG MCU. You can read opel pin code from ecus. with 4.74 can do couple Keys.

If car is not very new you can read all memories with tools above.

In my opinion and when i started, i buy 2014 UPA USB first for everything eprom and mcu related, very good tool and affordable also the script capability is a wonderful thing and really gives speed to your work. After Fgtech galletto v54 for ecu bdm, jtag, boot mode etc… For other specific jobs then think ETL Xprog Carprog etc… This is my opinion its value its up to you to decide.

Anyway, you must look for what you want or what you need a good programmer to read all cpu and eeprom, or you want a programmer ( can read all eeprom but can’t read all cpu motorola ) with some calculations !!

http://weblog.com/carprog-vs-upa-vs-xprog-m-vs-fgtech.html

Fgtech Galletto V54 Low Voltage Problem Solution

I have 2 fgtech galletto 4 v54 master ecu programmers. One worked without issue. And I installed a good herein. It can also start the program, but I can not use.Software warns "LOW VOLTAGE". What could be the problem?

Obdii365 engineer solution:

Do not shut down the Fgtech v54 software program. Keep software running.

Disconnect the fgtech galletto from laptop. 

Reconnect the galletto v54 with laptop via USB cable.

Then the laptop will detect the voltage. 

Fgtech galletto read FIAT Ducato euro 5 via BDM

Just tested Fgtech galletto 4 v54 master ecu programmer on Fiat Ducato via BDM. Worked great.

FIAT Ducato euro 5 MJD 8F3 +++150HP +++ speed +++RPM (((((((((((+++Power-engine)))))))))

http://www.obdii365.com/wholesale/v54-fgtech-galletto-4-master-bdm-tricore-obd-function.html

Fgtech galletto v54 failed to read opel edc16c39 via OBD?

My fgtech galletto 4 v54 master cannot read opel edc16c39 via OBD. Does it give a full or partial read?




Customer Solutions:

1.

Fgtech Galletto don't read this ecu via obd. Only BDM

If you wanna do it by obd, do it with kess v2.
Fgtech v54 is too fast and you may have problem after write
i did it with kess v2 master.




2.

Only bdm for full flash wiit galletto.
Mpps read obd partial this ecu


3.
With galletto 4 you have virtual read and partial real read....that if you have the original one. Yes, and full read is required only if You need to see full dtc tables. DPF need only one switch. You will need a bdm full read to do the dpf/egr delete

Fgtech Galletto flash MPC mpc55xx PDF via BDM

Just flashed MPC mpc55xx dpf OK via BDM/JTAG by using Fgtech Galletto 4 V54 master ECU tuning kit.

pinout attached:
                   

www.obdii365.com

How to flash sagem s2000 rpmt with fgtech galletto v54

I need to read ECU Renault espace 2l Sagem s2000 RPTM.I do not know how and i need a photo pinout for this ecu. I have Fgtech galletto 4 v54 master BDM-Tricore-OBD programmer. I had some search work and finally got the problem solved. It is a long story. 

Sagem s2000:

A ECU tuner said that he has flashed one from 1.8 to 1.6 engine. He used K-tag,but it work with Fgtech Galletto v54 in boot mode also.
Another one attached me some photos:

But they does not work.I wan't to remove on error from throttle which is permanent.

error is : PF 413. Then I continue looking for the solution on how to solve this error PF 413 by resoft flash.




A experienced engieer provided me some suggestions:

"Flash is not in mpc. Flash is 29f200.
I was talking that you have to choose that type of mpc for bootmode. An then choose external flash.
The other foto is for psa s2000 (not rpm) ecu.


You need another ecu, or change driver.
In fact it is an analogic to digital converter.

You have to pull out the silicone.
Then measure the throttle pin's to the IC. That is the driver.

It is easyear to buy another ecu, then transfer full flash to it.I did-it with galleto in boot mode.
Back-up the old one, then move eprom from one to another, and you are ready to start.


Moove flash with galleto, and eeprom by hot air.When you fisicaly move eprom (95p08 as i remember), then you move immo also.


Your car is ready to start."




I buy new ecu sagem s 2000 rptm from renault laguna 1,8 gazoline.
Hardware It seems as.I red flash with galletto v 54 ok.
Problem is i no find immo chip for cloning this ecu.







Again with the help of the tuning master.

I write flash with galletto in the new ecu.ok
Now must move immo chip (95080c) with hot air.

the photo in #9 is so clear, the chip marked 95080 3.



www.obdii365.com

Fgtech Galletto V54 needs to close error solution

Problem:
I have installed on my new WinXP computer Fgtech galletto 4 v54 sofware and its give now error.i have used usb fix files. I disable anti-virus program and network connection. I re-install software several times,but still failed.



Error:

FGtech v54 has encountered a problem and needs to close. We are sorry for the inconvenience.

Customer solution:

rewrite ftd...

Code:

http://www.gbcnet.net/showthread.php?63775-Risolvere-ripristinare-problema-FGTech-Galletto-2-Master-errore-EOBD2-exe
www.obdii365.com