FGTech Galletto 4 v54 Flash VAG Bosch EDC16U34 ECU

Multi-language FGTech Galletto 4 Master V54 is the fastest and most secure chip tuning tool supporting wide range of vehicles, including car, Truck and Motorbike, even Marine, BDM MPCxx and checksum. Here is the instrcution on how to flash VAG Bosch EDC16U34 ECU with Fgtech galletto v54. 

OS: A laptop running Win XP home (without any anti-virus software and internet/network connection)

Guide to flash VAG Bosch EDC16U34 ECU with Fgtech via BDM:

1. Install the V54 FGTech Galletto 4 Master Software;
Video for Installation Reference: https://www.youtube.com/watch?v=R0gpO0wAxZw

2. Hook up V54 FGTech ECU tuning kit to PC/Laptop, setup boot and BDM.

3. Find out the BDM pads showed at following picture;

4. Carefully align with the BDM Port ECU programming spring adapter/probe drop and secure frame.

Kindly Note: Confirm all is connected correctly;

5. Run FGTech galletto V54 software, accept the system notice.

Kindly Note:
Make sure you have 12V+ feeding FGTECH 4 master main device and the intermediate adapter.

6. Turn intermediate adapter to ON, the read LED indicator will flash;

7. Click the Option list as the order: “Select Driver” >> “BMD-Jtag” >> “Connect”;

8. If communication between FGTech Galletto 4-Master V54 and PC/Laptop is well built, green bar will start loading and finally display ECU information.

9. Ready to read and write ECU. Choose “Read EEPROM” to read EEPROM via system prompts, and then select “Write Eeprom”; once ok, turn the switch off.

10. Exit FGTech V54 software program.