Fgtech Galletto 4 V54 All Pinouts Keep Updating

Here we sharing lots of wiring connection pinouts to Fgtech Galletto 4 V54 master ecu programmer.

Tip: Click to enlarge.  

CAT challenger-ADEM IV

 Mercedes truck round diagnostic plug

Mercedes truck plug year <2004 Sprinter/Actros/Atego/Axsor/ Econic/Class/Bredamenarini Bus

 BMW moto round diagnostic plug

  BMW moto round diagnostic plug 20  PIN

 Volkswagen truck Bosch EDC7C1 9 Poli

 Cummins VW Truck Bosch EDC7C1/C2 CAN

Bosch EDC7C1/C2

 Cormic

 DAF EDC7 C3

 DAF

 FENDT 714-724-720 EDC17CV56 CAN

 Deutz

 Aprilia Dorsoduro ECU IAW5DM

 Bosch EDC7U31-EDC16C39

 Deutz EDC17 CV52/54/56 CAN TTV Automatic Gear

 Deutz EDC17 CV52/54/56 CAN manual gear

FENDT 818

 FENDT

 Iveco Daily 38 PIN Plug

 Iveco truck Laverda 30 Pin Plug

 Jhon Deere

 Deutz same Lamborghini hurlimann

 Landini

 MAN truck EOBD2 diagnostic Plug

 MAN TG-A

MAN round connector 

 Massey Ferguson

 MC Cormic

Mercedes round diagnostic plug

 New Holland TM190

  New Holland

 Nissan Athleon Bosch MS6.4

 Quad BRP Canam Renegade 500-800

 Renault Magnum midlum premium

 Renault Mascott

 Scania D-94, R-94, R-114, R-124, R-164

 Steyr

Valtra T190

 Volvo truck

IAW Marelli59F Fiat

http://www.obdii365.com/wholesale/new-v54-fgtech-galletto-4-master-bdm-tricore-obd-function.html

BDM FRAME with Adapters Set for FGTECH

Read Bosch EDC15P+ Boot with MPPS, Fgtech or Kess V2?

Question before entering:

I have some trouble with my spare EDC15P+ ECUs.  I have now invested in a MPPS V21 because of its booting capabilities!  But No matter what i do, MPPS keeps saying “Booting of ECU failed” or it freezes during connection establishment. I have tried this om 3 different ECU’s with bad flash and 2 PC’s.

The procedure i use:
Generic -> Micro Boot -> EDC15P -> Pin 24 to ground and Power On -> Remove ground from Pin 24 -> Select ECU ID

Happens every time and it’s driving me nuts. I have bought MPPS for the sole purpose of recovering bad ECU’s, so i really hope that some of you maybe can help me with this.

Expert solutions:

Solution 1: with MPPS

With MPPS V21, you need luck. V21 maybe too new to this ecu. 

Check with multimeter pin140 to pin44 and pin104 to pin24.

I bought MPPS HW12 china clone, software v16 for hardware 12. For a long time ago I had a similar problem with VW Sharan , I do not remember exactly how I was reinstall the firmware on it.  But finally it works. Here are some pictures:

Solution 2:

MPPS V13 no problem on this ecu

I try read with kess v2 and mpps v21 edc15p+ and I get error, but with mpps v13 no problem to reading this ecu on table.

So i finally got my spare ECU’s working again. I ordered a MPPS v13 ecu flasher, and that one was able to bootflash all the ECU’s.

Solution 3:

Kess v2 master read EDC15P+ on bench on issues

Testing edc15p+ of a Seat Ibiza

Solution 4: 

Fgtech Galletto V54 on bench Writing vw EDC 15 P+ no problem

VW pasat 1.9 PD writing edc 15p+ 115 mph up to 130mph and egr off.

http://blog.obdii365.com/2018/05/11/read-vag-bosch-edc15p-boot-with-mpps-fgtech-or-kess-v2/