Fgtech Galletto flash MPC mpc55xx PDF via BDM

Just flashed MPC mpc55xx dpf OK via BDM/JTAG by using Fgtech Galletto 4 V54 master ECU tuning kit.

pinout attached:
                   

www.obdii365.com

How to flash sagem s2000 rpmt with fgtech galletto v54

I need to read ECU Renault espace 2l Sagem s2000 RPTM.I do not know how and i need a photo pinout for this ecu. I have Fgtech galletto 4 v54 master BDM-Tricore-OBD programmer. I had some search work and finally got the problem solved. It is a long story. 

Sagem s2000:

A ECU tuner said that he has flashed one from 1.8 to 1.6 engine. He used K-tag,but it work with Fgtech Galletto v54 in boot mode also.
Another one attached me some photos:

But they does not work.I wan't to remove on error from throttle which is permanent.

error is : PF 413. Then I continue looking for the solution on how to solve this error PF 413 by resoft flash.




A experienced engieer provided me some suggestions:

"Flash is not in mpc. Flash is 29f200.
I was talking that you have to choose that type of mpc for bootmode. An then choose external flash.
The other foto is for psa s2000 (not rpm) ecu.


You need another ecu, or change driver.
In fact it is an analogic to digital converter.

You have to pull out the silicone.
Then measure the throttle pin's to the IC. That is the driver.

It is easyear to buy another ecu, then transfer full flash to it.I did-it with galleto in boot mode.
Back-up the old one, then move eprom from one to another, and you are ready to start.


Moove flash with galleto, and eeprom by hot air.When you fisicaly move eprom (95p08 as i remember), then you move immo also.


Your car is ready to start."




I buy new ecu sagem s 2000 rptm from renault laguna 1,8 gazoline.
Hardware It seems as.I red flash with galletto v 54 ok.
Problem is i no find immo chip for cloning this ecu.







Again with the help of the tuning master.

I write flash with galletto in the new ecu.ok
Now must move immo chip (95080c) with hot air.

the photo in #9 is so clear, the chip marked 95080 3.



www.obdii365.com

Fgtech Galletto V54 needs to close error solution

Problem:
I have installed on my new WinXP computer Fgtech galletto 4 v54 sofware and its give now error.i have used usb fix files. I disable anti-virus program and network connection. I re-install software several times,but still failed.



Error:

FGtech v54 has encountered a problem and needs to close. We are sorry for the inconvenience.

Customer solution:

rewrite ftd...

Code:

http://www.gbcnet.net/showthread.php?63775-Risolvere-ripristinare-problema-FGTech-Galletto-2-Master-errore-EOBD2-exe
www.obdii365.com

Fgtech Galletto V54 tested model and engines

Fgtech Galletto 4 V54 master OBD-BDM-Tricore is one of the best selling ecu programmer comparing with others,i,e kess v2,Ktag, KTM100 etc.

No dongle no shit. If you worry, it needs a dongle to operate and do not have as many USB ports, then Galletto V54 is better to have.Run faster. Fgtech 4 galletto-Master this new system developed with high-speed USB2 technology so it works faster.It works with not only cars, he also works with Truck, motorbyke, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. What BDM-TriCore Galletto do?


According to the test some customers, Fgtech V54 can operate with the following types of engines.

I tested Delphi crd 2.61 BDM EDC16 with Jtag can work with BGA Clio 1.2 ok. DCM st10F280 perfect.Test work truck, Bosch 6.2 daf Works, Scania and Volvo test renault Ecu lucas trw also work .Working fine for PCR2.1 I made a 2012 Audi A1 1.6 TDI remove dpf and employment agreement, the procedure is simple. Need first unlock by Tricore then read / write OBD.edc17cp14 vag with the startup mode and works perfectly! Reading writing is correct! Now I'm off to EDC17.Tried solution properties on edc16c39 Alfa 159, does not work by OBD.BDM OK, tried on 4 ECU Bosch.EDC17 Passat 2.0TDI 2008, read and write ok by OBD.EDC17 bmw320d 2008 ra ad write by OBD okEC17c46, class b mb 180cdi 2009 Tricore read a script, okay also.I test sid804 ford with OBD works well!

www.obdii365.com

Fgtech Galletto V54 read Chevrolet caprice and GMC 04

I have read some GM models with Fgtech Galletto 4 V54 master clone ecu programmer. I want to share with you what i have discovered about Fgtech V54 so far.

I put Winxp on an old laptop without anti-virus program, it goes well.

I have tried it on 2008 Chevrolet caprice E38(Middle East), and 2004 GMC 1MB. It's worked with them.

Here reading my caprice...

If you read GMC 1MB with Fgtech galletto, add this adapter

http://blog.obdii365.com/2016/04/05/fgtech-galletto-read-chevrolet-caprice-and-gmc-ecu/

FgTech Galletto flashes Bosch EDC16 ME9 ECU

Here is the instruction on how to flash Bosch EDC16 ME9 ECU via BDM with FgTech Galletto 2 master clone ecu programmer. 


Procedure of BDM flashing EDC16 with FgTech galletto:
See the BDM pads

Now careully read with adapter springs drop and secure frame

Open FgTech 2 software

Make sure that you have 12+v feeding FgTech and the intermediate adapter

Swicth intermidiate adapter ON

Red LED will illuminate

Click to Select Driver –> BDM/JTAG –> BDM/JTAG Mode –>BDM MPC –> 55x/56x

Click Connect

ECU information

When finished, turn off the switch and exit FgTech 2 program 

www.obdii365.com

Fgtech Galletto 2 EU failed to write EDC17,what works

A customer shared his problem and solution when read and write EDC17 with the FGTech Galletto 2 master ecu programmer.

“I tried to read in boot mode the ECU EDC17 C41 – TC1797 from bmw 116 F20 bosch nr. 0281030980,
with FGTech Galletto 2 EU and when click in “ECU Data” button appear this info from ecu :

“Infineon Tricore TC1797
CPU-ID=0000910100001820
Internal Flash ID = 0053C001
Internal Flash 4096Kb Protected
OTP Protect: 0x14000 — 0x17FFF
Internal Flash2 ID = 0055C001
Internal Flash 4096Kb Protected
EEprom 64Kb Protected

READING ECU
Start reading…ERROR UNLOCK READ – TRY TOOL TRICORE PASSWORD TPROT V08 ”

I tried to use the TRICORE PASSWORD TPROT V08 from menu without boot mode but i can’t.
Says the message fgtech error

Then how can I read / write this ecu for tuning with my tool FGTech Galletto EU version?

Now obdii365.com engineer give you an answer:

Forget about F series with FGTECH, you can’t do it.
Including KTAG, it can only on Exx series BMW, NOT Fxx.
So far, the ideal ECU programmer is DS17 Infineon Tricore Boot Reader, a part of senior engineers have proved it can worked out EDC17, while KESS V2 can’t.

General introduction about DS17 ECU Programmer(DS17 Infineon Tricore Boot Reader).
DS17 Infineon Tricore Boot Reader is an updated version for BDM100, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system. DS17 supports EDC17,  MED17,  ME17,  MEV17,  MEVD17,  PCF2.1,  SD13,  SD14,  SD16,  SID208,  SID807.